Related Manuals for Honeywell 2116
Summary of Contents for Honeywell 2116
- Page 1 Models 2116, 2118, 2120 DIGITAL STEEL FIRE & SECURITY SAFE Read this manual carefully and never store it inside the safe!
-
Page 2: Package Contents
Models 2116, 2118, 2120 Digital Steel Fire & Security Safe PACKAGE CONTENTS 1 – Digital Steel Fire & Security Safe 1 – Operation Manual 2 – Entry Keys 1 – Emergency Override Key 1 – Silica Gel Pack ATTENTION DO NOT RETURN SAFE TO STORE! For missing parts or difficulty operating your safe, please contact our Consumer Assistance Department by telephone. -
Page 3: Setup And Operation
SETUP & OPERATION STEP 1: INSTALL BATTERIES IMPORTANT: The starter batteries included with this product are for testing purposes only and should be immediately replaced with new alkaline or lithium batteries. It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries. 1. - Page 4 SETUP & OPERATION STEP 2: SET CALENDAR AND CLOCK Once batteries are installed and the control pad is powered, the next step is to begin by programming the clock and calendar. READ ENTIRE DIRECTIONS AND WRITE DOWN DATE/DAY/TIME BEFORE PROGRAMMING. NOTE: You must enter all information without delays.
- Page 5 SETUP & OPERATION STEP 3: UNLOCK AND OPEN THE SAFE This safe is equipped with a dual digital/key lock system that requires entering an active user code to unlock it and an entry key to open. It allows for two separate reprogrammable active user codes.
- Page 6 SETUP & OPERATION STEP 4: PROGRAM NEW USER CODES SECURITY NOTE: To insure privacy, this procedure should be repeated for both of the factory pre-set codes 1. Unlock the safe with the first factory pre-set (or current active) code. OPEN 2.
-
Page 7: Security Features
SECURITY FEATURES PRIVACY MODE: If you wish to prevent your personal code from being read on the digital readout, it can be hidden from view by inserting the “ ” after “ ”. # 1 2 3 4 # Example: “... - Page 8 To de-activate alarm or turn off alarm siren, enter an active user code. SECURITY FEATURES HISTORICAL ENTRY DATA RETRIEVAL This safe has the ability to record into memory up to 50 entry records of those gaining access to the safe. To retrieve this data, do the following: Enter user code 1 or user code 2 and display will read “OPEN”.
-
Page 9: Emergency Access
EMERGENCY ACCESS OPEN SAFE WITH EMERGENCY ACCESS KEY Insert the emergency override key and turn to the left. ORDERING NEW / REPLACEMENT KEYS The following information is required to order keys: 1. PROOF OF OWNERSHIP (1 of 2 Options Below) SALES RECEIPT &... -
Page 10: Limited Warranty
LIFETIME AFTER-FIRE REPLACEMENT GUARANTEE If this Honeywell fire resistant product was purchased from LH Licensed Products, Inc. (“LHLP”) and is damaged by fire at any time while still owned by you (the original owner), LHLP will ship a free replacement if you send the following to Customer Service, LH Licensed Products, Inc., 860 E. -
Page 11: Consumer Assistance
Manufactured by LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. M2116E20151012...