Front Panel
The router front panel, shown in
interpreting the status lights, see
Router Functions" on page
Figure 2
You can use the status lights to verify various conditions.
Table 1.
Status Light Descriptions
Label
Activity
Solid Amber
Solid Green
Blinking–Amber
1. Power
Blinking–Green
Off
Solid Green
2. Push 'N'
Blinking Green
Connect
Off
Solid Blue
Blinking Blue
3. Wireless
Off
Getting to Know Your Wireless Router
Figure
2, contains status lights. (For more information on
"Verifying Your Connection" on page 17
30.)
Description
The router is performing the power-on self-test diagnostic.
The power is on and the router is ready.
A software update is in progress.
Firmware is corrupted. See
page 30
for instructions on restoring your router firmware.
Power is not being supplied to the router
Indicates a (WPS) connection to a WPS-capable device.
WPS-capable device can associate with the router within 2 minutes.
No WPS connection exists.
The wireless interface is enabled.
Data is being communicated over the wireless network.
The wireless interface is turned off.
and
"Checking Basic
"Checking Basic Router Functions" on
3