Introduction; Gsm7212 Front Panel And Leds - NETGEAR ProSafe GSM7212 Hardware Installation Manual

The NETGEAR Managed Layer 2 Switch is a state-of-the-art, high-performance,
IEEE-compliant network solution. It includes powerful management features that
you can use to eliminate bottlenecks, boost performance, and increase
productivity.
This guide describes the hardware for the following NETGEAR switches:
• ProSafe 12-Port Gigabit L2 Managed Switch Model GSM7212
• ProSafe 24-Port Gigabit L2 Managed Switch Model GSM7224
• ProSafe 48-Port Gigabit L2 Managed Switch Model GSM7248
These switches can be free-standing, or rack-mounted in a wiring closet or an
equipment room. For information about features for each product, see the
NETGEAR Web site at http://www.netgear.com.

GSM7212 Front Panel and LEDs

The following figure shows the front panel of the GSM7212. It contains LEDs,
RJ-45 jacks, SFP module bays, and a console port.
LEDs
Figure 2-1

Introduction

RJ-45 jacks
v1.0, March 2006
Chapter 2
Introduction
SFP Console
module port
bays
2-1