Gsm7224 Rear Panel; Gsm7248 Front Panel And Leds - NETGEAR ProSafe GSM7212 Hardware Installation Manual

Managed Layer 2 Switches GSM7212, GSM7224, and GSM7248 Hardware Installation Guide

GSM7224 Rear Panel

The rear panel has a standard AC power receptacle for the supplied power cord.
Figure 2-4

GSM7248 Front Panel and LEDs

The following figure shows the front panel of the GSM7248. The front panel
contains LEDs, RJ-45 jacks, SFP module bays, and a console port.
LEDs
Figure 2-5
The following table describes the GSM7248 LEDs on the front of the switch.
Table 2-3.
LED
Power
2-4
RJ-45 jacks
GSM7248 LED Description
Description
• Green: Power is supplied, and the switch is operating normally.
• Off: No power is applied, or power failure.
v1.0, March 2006
Power receptacle
SFP
module
bays
Console
port
Introduction