Table of Contents
Advertisement
Optional Module Installation
Note that the printer may or may not be supervised as determined by user programming. Refer
to"Printer/PC" on page 112.
Printer Configuration
Refer to the documentation supplied with the printer for pertinent information about printer setup.
Set the printer's options as listed in the following table:
PC Configuration
The Windows-based VeriFire Warden Programming Utility Kit contains CD-ROM with on-line
help file.
2.9.3 Digital Communicator and Annunciators
ACM-8R Relay Control Module
The ACM-8R module provides eight Form-C relays with contacts rated for 5 amps. When installed
with an NFW2-100 FACP, the ACM-8R modules provide relay activation for each of the 99
possible FACP zones plus special functions. Options exist to allow for alarm only or alarm and
trouble activation per zone. Output activation for general alarm, general trouble, general
supervisory, NAC fault, AC fail, walktest start and battery trouble are also available. The ACM-8R
can be mounted remotely in an ABS-8R annunciator surface-mount backbox. Refer to the
ACM-8R manual for information on setting module switches for addressing and relay functions.
ACS and AFM Series Annunciators
ACS and AFM Series Annunciators provide visual indications of FACP status in remote locations.
Refer to the appropriate annunciator manual for information on installation, wiring and operation.
FireWarden 100-2/E — P/N 52778:A 11/04/2005
5 4 3 2 1
9 8 7 6
PRT/PK-CABLE
TX
RCV
DTR
GRND
TB8
TB9
OUT+ IN+ OUT- IN-
Figure 2.17 Serial Printer and Computer Connections
COMMUNICATION SETUP
BUFFER:
DATA BITS:
PARITY:
STOP BIT:
BAUD RATE:
AUTOMATIC LINE FEED
AUTOMATIC CARRIAGE RETURN
Table 2.1 Printer Options
Red
White
Green
Black
TB10
SLC
SLC
SLC
SHIELD
SLC
B+ A+ B- A-
A
B
ACS
LARGE
7
EVEN
1 STOP
2400/4800/9600
NO
NO
Installation
37
Advertisement
Table of Contents
