Table of Contents
Advertisement
WARNING! The saw chain is sharp. Always wear protective
gloves when performing maintenance to the chain.
ent
use
Inspecting and cleaning the chain brake
may
Always keep the chain brake mechanism clean by lightly brushing the
linkage free from dirt.
dge
Always test the chain brake performance after cleaning. Refer to
ian.
"Checking and operating the chain brake" section in this manual for
nly.
additional information.
MAINTENANCE SCHEDULE
ent,
ous
Daily check
this
Bar lubrication
nt.
Chain tension
tion
Chain sharpness
and
bar,
For damaged parts
t to
For loose fasteners
ury.
Chain brake function
the
Inspect and clean
hain
vice
Bar
tion
Complete saw
and
Chain brake
SYMBOLS
urity
part
y an
Safety alert
Read and understand all instructions before
operating the product. Follow all warnings and
safety instructions.
Wear eye, ear, and head protection.
nch
Wear non-slip safety footwear when using the
product.
e of
Wear non-slip, heavy-duty gloves.
sure
Beware of chain saw kickback and avoid contact
with bar tip.
rive
Do not expose the product to rain or damp
condition.
ove
Moving direction of the chain.
(Marked under the chain cover)
ion"
Hold and operate the saw properly with both
hands.
bar
Do not operate the saw using only one hand.
can
Before each use
Before each use and frequently
Before each use, visual check
Before each use
Before each use
Before each use
Before each use
After each use
Every 5 hours of operation.
Remove the battery pack before starting any work
on the product.
Set the chain brake to the RUN position.
Rotate to adjust chain tension
+ = Tighten the chain
- = Loosen the chain
Set the chain brake to the BRAKE position.
99
Guaranteed sound power level
Regulatory Compliance Mark (RCM). Product meets
applicable regulatory requirements.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
The following signal words and meanings are intended to explain the
levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
33
33
Advertisement
Table of Contents
