Chainsaw Safety Warnings - AEG A18CHS14 Original Instructions Manual

Table of Contents

Advertisement

Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
ADDITIONAL GENERAL SAFETY WARNINGS
Some regions have regulations that restrict the use of the product.
Check with your local authority for advice.
Never allow children or people who are unfamiliar with the
instructions to use the product. Local regulations may restrict the age
of the operator.
Ensure that before each use that all controls and safety devices
function correctly. Do not use the product if the OFF switch does not
stop the motor.
Wear full eye and hearing protection, strong sturdy gloves, and head
protection while operating the product. Use a face mask if operation
is dusty.
Do not wear loose-fitting clothing, short trousers, or jewellery of any
kind.
Secure long hair so that it is above shoulder level to prevent
entanglement in moving parts.
Beware of thrown, flying, or falling objects. Keep all bystanders,
children, and animals at least 15 m away from the work area.
Do not operate the product in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
The use of hearing protection reduces the ability to hear warnings
(shouts or alarms). The operator must pay extra attention to what is
going on in the work area.
Operating similar tools nearby increases both the risk of hearing
injury and the potential for other persons to enter your work area.
Keep firm footing and balance. Do not overreach. Overreaching can
result in loss of balance and can increase the risk of kickback.
Keep all parts of your body away from any moving part.
Inspect the product before each use. Check for correct operation of
all controls, including the chain brake. Check for loose fasteners, make
sure that all guards and handles are properly and securely attached.
Replace any damaged parts before use.
Do not modify the product in any way or use parts and accessories
that are not recommended by the manufacturer.
WARNING! If the product is dropped, suffers heavy impact,
or begins to vibrate abnormally, immediately stop the product
and inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by an
authorised service centre.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and
product damage due to short circuit, never immerse your tool,
battery pack, or charger in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach-containing products,
etc., can cause a short circuit.
28

CHAINSAW SAFETY WARNINGS

Keep all parts of the body away from the saw chain when
operating the product. Before you start the chainsaw, make
sure the saw chain is not contacting anything. A moment of
inattention while operating chainsaws may cause entanglement of
your clothing or body with the saw chain.
Always hold the chainsaw with your right hand on the rear
handle and your left hand on the front handle. Holding the
chainsaw with a reversed hand configuration increases the risk of
personal injury and should never be done.
Hold the product by the insulated gripping surface only, because
the saw chain may contact hidden wiring. Saw chains contacting a
"live" wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Wear safety glasses and hearing protection. Further protective
equipment for head, hands, legs and feet is recommended.
Adequate protective clothing will reduce personal injury by flying
debris or accidental contact with the saw chain.
Do not operate a chainsaw in a tree. Operation of a chainsaw while
up in a tree may result in personal injury.
Always keep proper footing and operate the chainsaw only
when standing on fixed, secure and level surface. Slippery or
unstable surfaces such as ladders may cause a loss of balance or
control of the chainsaw.
When cutting a limb that is under tension be alert for spring
back. When the tension in the wood fibres is released the spring
loaded limb may strike the operator and/or throw the chainsaw out
of control.
Use extreme caution when cutting brush and saplings. The
slender material may catch the saw chain and be whipped toward you
or pull you off balance.
Carry the chainsaw by the front handle with the chainsaw
switched off and away from your body. When transporting
or storing the chainsaw always fit the guide bar cover. Proper
handling of the chainsaw will reduce the likelihood of accidental
contact with the moving saw chain.
Follow instructions for lubricating, chain tensioning and
changing accessories. Improperly tensioned or lubricated chain may
either break or increase the chance for kickback.
Keep handles dry, clean, and free from oil and grease. Greasy, oily
handles are slippery causing loss of control.
Cut wood only. Do not use chainsaw for purposes not intended.
For example: do not use chainsaw for cutting plastic, masonry or
non-wood building materials. Use of the chainsaw for operations
different than intended could result in a hazardous situation.
Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the guide bar touches
an object, or when the wood closes in and pinches the saw chain in
the cut.
Tip contact in some cases may cause a sudden reverse reaction,
kicking the guide bar up and back towards the operator.
Pinching the saw chain along the top of the guide bar may push the
guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of the saw
which could result in serious personal injury. Do not rely exclusively
upon the safety devices built into your saw. As a chainsaw user, you
28
sho
or in
Kick
proc
prec
Mai
cha
bod
forc
take
Do
help
the
Onl
man
cha
Foll
inst
can
AD
It is
ope
Ens
and
Pers
hea
aler
ther
Do n
foot
Bew
or r
Do n
Alw
firm
The
fron
Befo
con
Do
atta
The
a m
larg
Wea
equ
face
An
resu
the
You
secu
not
To r
alwa
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acs18b

Table of Contents