AEG ACS18B30 Original Instructions Manual

AEG ACS18B30 Original Instructions Manual

Hide thumbs Also See for ACS18B30:

Advertisement

Quick Links

ACS18B30
ACS183060

Advertisement

Table of Contents
loading

Summary of Contents for AEG ACS18B30

  • Page 1 ACS18B30 ACS183060...
  • Page 2 ENGLISH Picture section with operating description and functional description...
  • Page 3 Text section with Technical Data, important Safety and Working Hints and description of Symbols...
  • Page 5 START STOP...
  • Page 8 Remove the battery pack before starting any work on the machine. click...
  • Page 9 75-100 % 50-75 % 25-50 % 0-25 %...
  • Page 11 Only fi nger-tighten! APPROX. 4-5.5 mm...
  • Page 12 APPROX. 4-5.5 mm FLATS...
  • Page 14 START STOP...
  • Page 15 BRAKE ON BRAKE OFF...
  • Page 17 Only fi nger-tighten!
  • Page 18 APPROX. 4-5.5 mm FLATS...
  • Page 23 5 cm / 2 in 5 cm / 2 in Figure 4 Figure 1 Figure 5 Figure 2 Figure 3 Figure 6...
  • Page 24 Figure 7 Figure 11 diffe tota Figure 8 Figure 11 Figure 12 Iden Fail Figure 9 Figure 13 inat pers tool Figure 14 Figure 10...
  • Page 25: Technical Data

    TECHNICAL DATA CORDLESS CHAINSAW ACS18B30 ACS183060 Production code 4000 4604 70 01 4000 4604 70 01 000001-999999 000001-999999 No-load speed 10 m/s 10 m/s Max bar length 300 mm (12”) 300 mm (12”) Usable cutting length 250 mm 250 mm...
  • Page 26 Cut wood only. Do not use chainsaw for purposes not Wear a helmet at all times when operating the product. A helmet, intended. For example: do not use chainsaw for cutting plastic, equipped with mesh visor, can help reduce the risk of injury to the masonry or non-wood building materials.
  • Page 27 met, Gloves wood is left to act as a hinge. The hinge wood keeps the tree from twisting and falling in the wrong direction. Do not cut – should comply with EN381-7 and be CE marked through the hinge. Leg protection (chaps) As the felling gets close to the hinge, the tree should begin ould should comply with EN381-5, be CE marked and provide...
  • Page 28: Additional Safety Warnings

    Do not dispose of used battery packs in the household refuse or reasons the product must be adequately controlled by using two- by burning them. AEG Distributors offer to retrieve old batteries to handed operation at all times. protect our environment.
  • Page 29: Know Your Product

    If there is any doubt, leave it to a professional tree surgeon. ASSEMBLY Do not use the product in any other way as stated for normal use. WARNING! If any parts are damaged or missing do not KNOW YOUR PRODUCT operate the product until the parts are replaced.
  • Page 30: Transportation And Storage

    Inspecting and cleaning the chain brake Lith described, please contact one of our AEG service agents (see Always keep the chain brake mechanism clean by lightly brushing our list of guarantee/service addresses).
  • Page 31: Maintenance Schedule

    MAINTENANCE SCHEDULE When transporting batteries: ent, ■ Ensure that battery contact terminals are protected and t in Daily check insulated to prevent short circuit. ■ Ensure that battery pack is secured against movement within Bar lubrication Before each use ual. packaging.
  • Page 32: Ec Declaration Of Conformity

    EC-DECLARATION OF CONFORMITY Set the chain brake to the RUN position. We declare under our sole responsibility that the product described under “Technical Data” fulfills all the relevant Rotate to adjust chain tension provisions of the directives 2011/65/EU (RoHs), 2014/30/ + = Tighten the chain EU, 2006/42/EC, 2000/14/EC, 2005/88/EC, and the following - = Loosen the chain...
  • Page 36 Techtronic Industries GmbH Max-Eyth-Straße 10 71364 Winnenden Germany 960994077-02...

This manual is also suitable for:

Acs183060

Table of Contents