Step3: Device Settings [Baydevice_Ch*, Coupler No_Ch*] - Toshiba GRB200 Instruction Manual

Step3: Device settings [BayDevice_CH*, Coupler No_CH*]

CH1 and CH7: are assigned on 'Feeder', so Feeder is set for the [BayDevice_CH1] and

[BayDevice_CH7]. The settings [Coupler_No_CH1] and [Coupler_No_CH7] are left with
default number '1', because they are not applied here.
CH2 and CH3: are assigned on 'West coupler', whereas CH4† is assigned on 'North

Section'; CH5† and CH6† are assigned on 'South Section'. Therefore, Coupler is set for the
[BayDevice_CH2] to [BayDevice_CH6].
Coupler Numbers: West/North/South Couplers have to be identified by numbers uniquely.

The examples illustrate that '1', '2', and '3' are set for the [Coupler_No_CH2] to
[Coupler_No_CH6], but there is no rule to define the numbers.
[Coupler No_CH2], [Coupler No_CH3]＝1 (at West Coupler)
[Coupler No_CH4]＝2 (at North Section)
[Coupler No_CH5], [CH name_CH6]＝3 (at South Section)
CH8 to CH24: The [BayDevice_CH*] and the [Coupler No_CH*] are left with default Non

setting and default number '1'.
Setting items
CH1
On
[CH use_CH*]
West
[CH name_CH*]
Feeder
Feeder
[BayDevice_CH*]
1(NA)
[Coupler No_CH*]
[Zone1_CH*]
[Zone2_CH*]
[Zone3_CH*]
[ZoneR1_CH*]
[Zone-NoDIF_CH*]
[CB_CH*]
[DS11_CH*]
[DS12_CH*]
[DS13_CH*]
[DS21_CH*]
[Line1_CH*]
[Line2_CH*]
[Line3_CH*]
[CT-POS_CH*]
[ZACbyCB_CH*]
†Note: CH4, CH5, and CH6 are assigned at North/South sections, but they are not
assigned for End-section. Therefore '2' and '3' are set for [Coupler_No_CH4/5/6].
Table 3.3-1 Settings on Step3
CH2 CH3 CH4
On On On
North
West Coupler
Section
Coupler Coupler
1 2
- 21 -
CH5 CH6 CH7
On On On
South Section East Feeder
Coupler Feeder
3 1(NA)
6F2S1923 (0.03)
CH8 to CH24
Off
(no settings)
Non
1(NA)
GRB200C (Replica)