Toshiba GRB200 Instruction Manual page 11

[BayDevice_CH*]=Non: when other CHs is not to be employed in the busbar ,
set Non.
Setting items
BayDevice_CH* Non / Feeder / Coupler / EndSection
Coupler No_CH*
Note: As the setting [Coupler No_CH*] has a default number, it is not required for the
user to enter the number, when Non, Feeder, or EndSection is set for the
[BayDevice_CH*].
Figure 2.1-6 EndSection when CH1 is used
Table 2.1-3 Bay arrangement settings
Range
1 – 8
- 5 -
Unit Contents
- Bay device selection
- Coupler No. definition
6F2S1923 (0.03)
Default
Non
1
GRB200C (Replica)