Honeywell IMPACT IHR810 User Manual page 50

1. Set up the Port name of the Bluetooth Printer.
(The Factory Default BT NAME is "IHR810BT")
2. Set up the Password of the Bluetooth Printer.
(The Factory Default BT PINKEY is "0000")
3. After finishing the above settings, click "Setting", and then finished the settings of
Bluetooth printer Parameters.
11. USB Mode Setting:
Mode Setting of printer's USB port includes Usb Printing and Virtual Com. USB mode switches accordingto customer
demand.
12. Black mark Settings:
To set special paper printing with black mark.
1. Offset in paper-feed direction, offset in paper unwinding direction.
To set the direction of data calculation for paper cutting position, the default value is feed direction.
2. "Please enter the black mark spacing (mark length)" To calculate the center distance of two black marks.
3. "Set the black mark Maximum width".
It's a value to calculate the actual height of a black mark.
4. "The offset of paper cutting position relative to the black mark position".
It's to calculate the actual distance from the paper detector in the print head to the paper cutter.
5. "Distance between the print starting position and paper cutting position".
It's to calculate the distance from the print starting position to paper cutting position.
6. "Print a ticket test".
Click this button and a note will be printed out. If it's properly set, paper will automatically go a length of black mark
and then be cut.
7. "Feed to next print position".
Click this button and paper will go to the next print starting position for a blace marker. Print out theinformation to
test the right position.
8. "Feed to the next cutting position".
Click this button and paper will go to the next paper cutting position and paper will be cut to test the accuracy of
paper cutting position.
9. Turn on the black mark, turn off the black mark.
Black mark function is off by default. Turn on black mark function to make related Settings. In case black mark
position is detected incorrect, please reset referring to 7 "IHR810 black mark sensitivity" of "advanced".
13. Send file data
Click button, choose and open TXT format file in the pop-up dialog box, and then the printer will print the contents of
the file.
14. Cut With Beep
The alarm function can be set to turn on or off after cutting paper with cutter.
www.impactbyhoneywell.com
IHR810 User Manual
48.