Motorola DCT5100 Setup Manual page 9

Connecting the DCT5100 to a High-Definition TV and Home Theater
TO
TV/VCR
OUT
Y
Pb
Pr
Monitor
Cable/
Antenna IN
To take full advantage of the
DCT5100 digital audio features
you'll want to incorporate
a stereo or Home Theater
receiver. This diagram
illustrates how to integrate
your DCT5100, Home Theater
receiver and HDTV. We have
not illustrated how to integrate
a VCR or DVD player with a
Home Theater receiver. The
manual supplied with these
components would best
describe those connections.
IR
CABLE
USB
IN
Home Theater
IN IN OUT IN
S-Video
Video
R R R
Right
L L L
Left
AV #2 AV #1 Video 1
Video 1 Video 2
S-Video
Video
R R
Audio
L L
1. Using the Video Only diagram, connect your coaxial cable to the Motorola DCT5100 and the DCT5100 Y Pb Pr HD video connection directly
to your HDTV.
The audio options are dependent on the audio inputs available on your Home Theater receiver. We've listed them in order of sound quality.
OPTION ONE and TWO – Optical or RCA Type Digital Audio (orange)
(These two connections are of similar quality. Either one or the other may be used.)
Connector cables to be used: Optical or RCA type audio cable
2. Locate the OPTICAL SPDIF output on the DCT5100 and the OPTICAL SPDIF input on your digital Home Theater receiver.
This input may also be labeled Toslink on your digital Home Theater receiver.
3. Using an optical audio connector, connect the output on the DCT5100 to the input on your digital Home Theater receiver.
– OR –
2. Locate the orange RCA type SPDIF output on the DCT5100 and the RCA type SPDIF or digital audio input on your Home Theater receiver.
3. Using a single-pronged RCA type audio connector, connect the output on the DCT5100 to the input on your Home Theater receiver.
OPTION THREE – Baseband Audio
Connector cables to be used: Two-pronged RCA type audio cable (red & white)
3. Locate the AUDIO OUT L (white) & R (red) outputs on the DCT5100 and the AUDIO IN L & R inputs on your Home Theater receiver.
4. Using a two-pronged RCA type audio connector, connect the L & R outputs on the DCT5100 to the L & R inputs on your Home Theater
receiver. Remember L will go to L and R will go to R.
AUDIO IN VIDEO
R L SPDIF IN OUT
HPNA
S-VIDEO
TV
Pass Card
R L
Y Pb Pr
AUDIO
OUT
Receiver
Digital Audio
Coaxial
#1
Optical SPDIF
#2
HDTV
Video 3
Y
Pb
Pr
R
L
DCT5100
IEEE 1394
SWITCHED
105/125V
60Hz
4A MAX
CONVENIENCE
500W MAX
OPTICAL
OUTLET
SPDIF
Do not plug the DCT5100 power cord into a wall
outlet until you have completed all connections
between the DCT and other components.