Charging The Battery - Black & Decker BXLR500E Original Instructions Manual

ENGLISH (Original instructions)
Service:
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
A Main Body
B Blade
C Blade Cover
D Remover circle
E Fluff Container
F Indication light
G Switch
H USB Charging Port
I USB Cord
J Cleaning Brush
K Outer Foil
* If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.

CHARGING THE BATTERY

♦ Caution: A new battery is not fully charged and must
therefore be charged before the appliance is used for
the first time.
♦ Plug the USB cable into a universal USB charger.
♦ The indication light will come on and flash until the
battery is charged, when it will stop flashing, the product
is charged.
♦ Once charging is complete, unplug the USB cable from
the universal USB charger.
♦ NB: Do not use the appliance while it is connected to the
charger.
INSTRUCTIONS FOR USE
Before use
♦ Make sure that all the product's packaging has been
removed.
♦ Before using this product for the first time, it is important
to make a full charge of batteries.
4
Use
♦ Remove the protective cover.
♦ Turn the appliance on, by using the on/off button.
♦ The indication light comes on.
How to remove lint from clothes:
♦ Place the garment on a flat surface.
♦ Do not use the appliance on garments that are being
worn in order to avoid damage on the user or garment.
♦ For fast removal of lint, take the remover circle and move
the appliance back and forth on the clothes in a small
area.
♦ On thin texture clothes, pile them up into two layers and
gently use the appliance to remove the lint.
♦ Avoid contact with any protrusions on the clothes.
♦ On clothes with patterns, move the appliance in the
direction of the pattern for better results.
Once you have finished using the
appliance:
♦ Stop the appliance using the on/off button.
♦ Remove the fluff container, by pressing in the middle of
container and moving down.
♦ Clean the appliance.
CLEANING
♦ Switch off the unit and remove from charging before
undertaking any cleaning task.
♦ Disassemble the appliance in accordance with the
following steps.
♦ Remove the blade cover, turn the remover circle clock-
wise and uncouple it.
♦ Take out the rotative blades and clean the blades shaft
with the brush.
♦ Once cleaning is finish install the blades and outer foil
into the appliance.
♦ Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
♦ Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
♦ Never submerge the appliance in water or any other
liquid or place it under running water.