Advertisement
Replacement of GFX & Reverse
Bulbs:
1. Locate rubber socket cover over backside of
reverse/ground effects bulb housing. Remove
by pulling it off.
2. Locate the #2 Philips head screws in the center
of the housing and remove screw. Remove with
black ground wire.
3. Remove bulb, cut white wire.
4. Using a wire connector, connect the white wire
to the new bulb.
5. Reinstall in reverse order and test.
Differential Oil Change:
1. Lift trike in such a manner that the right tire can
safely be removed and the bottom drain can be
accessed.
2. Remove right rear wheel.
3. Drain oil from differential. Drain plug can be
accessed through opening in suspension lower
tray.
4. Remove the fill plug by accessing it through the
right fender opening.
5. After oil has finished draining, reinstall drain
plug and tighten to 22ft-lb.
6. Refill with one quart of gear oil. Use 80W-90 GL-
5 grade or higher, NON-synthetic oil. Do not
overfill or oil will be sprayed out the vent from
over pressure.
16
Advertisement
