Advertisement
I: Inspect and clean, adjust, lubricate, and/or replace if
necessary.
R: Replace
T: Check Torque of Head Bearings (top nut 80 ft.-lbs.
adjuster nut 30 ft.-lbs.)
This Schedule is in addition to the Honda Maintenance
Schedule
NOTE:
[1] Minimum pad thickness is .04 inches (1.02mm)
Replace as required.
[2] Wheel bearing torque 200 ft-lb
[3] Rear differential oil should be changed after the first
3 months or 500mi., whichever comes first. Use only
NON-synthetic 80W-90 GL-5 grade or higher gear oil.
The differential case should contain no more than 1 qt
of gear oil.
[4] CSC recommends an increased interval for
engine/transmission oil replacement for DCT equipped
Encore trikes. This recommendation is based on Honda
tech info.
The service life of wear items such as brake pads and
tires is dependent on many factors, including riding
habits, road type, vehicle loading, environment etc.
Service & Maintenance questions – contact CSC Parts &
Service at 434.263.6500
11
Advertisement
