Attaching The Shoulder Strap - Makita DUB187 Instruction Manual

Installing or removing the dust bag
Hook the claw of the dust bag to the hook of the main
unit, then hook the front side of the handle of the dust
bag to the main unit, and then pull up the rear side of
the handle until handle snaps into place as shown in
the figure.
1
3
Fig.4
► 1 . Claw 2. Handle 3. Dust bag
To remove the dust bag, perform the installation proce-
dure in reverse.
Installing or removing the wide
nozzle
Optional accessory
Insert the wide nozzle with its protrusions facing up into
the nozzle.
1
Fig.5
► 1 . Protrusion

Attaching the shoulder strap

CAUTION:
bination of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the machine package, but use
the hanging band recommended by Makita.
If you put on the shoulder harness included in the
machine package and the shoulder harness of the
backpack-type power supply at the same time,
removing the machine or backpack-type power supply
is difficult in case of an emergency, and it may cause
an accident or injury. For the recommended hanging
band, ask Makita Authorized Service Centers.
CAUTION:
the shoulder strap to the machine securely. If the
hooks are attached incompletely, they may come off
and cause an injury.
2
CAUTION:
dedicated to this machine. Using other shoulder
strap may cause an injury.
Attach the hook of the shoulder strap to the machine as
shown in the figure.
1
Fig.6
► 1 . Hook
7 ENGLISH
When you use the machine in com-
Be sure to attach the hooks of
Be sure to use the shoulder strap