Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature fan (cont.)
DISASSEMBLING
(2) Remove Ball bearings 608ZZ and 627ZZ with 1R269.
Fig. 2
Remove Ball bearings on the drive-end and the commutator-end of Armature using 1R269.
(drive-end: Ball bearing 608ZZ, commutator-end: Ball bearing 627ZZ)
Ball bearing 608ZZ
ASSEMBLING
Assemble by reversing the disassembly procedure. (Refer to Fig. 1)
Note:
When assembling Fan 100 to Armature, do not forget to put Flat washer 5 and Flat washer 8 in place.
(Refer to lower right two illustrations in Fig. 1)
C
ircuit diagram
Fig. D-1
Color index of lead wires' sheath
Black
White
Controller
1R269
Blue
Brown
4
2
1
3
Switch
Noise suppressor
Noise suppressor is not used
for some countries.
Field
Ball bearing 627ZZ
White lead wire is used
for some countries
instead of blue.
Black lead wire is used
for some countries
instead of brown.
Grounding terminal
Grounding terminal of
Noise suppressor is not used
for some countries.
Line filter
Line filter is not used
for some countries.
Brush holders
P 3/ 4
Power supply cord
Advertisement
