Delete; Dir - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch CLI Reference Guide
Example
This example shows how to exit from the Interface Configuration Mode and return to the Global Configuration
Mode.
Switch#configure terminal
Switch(config)#interface vlan1
Switch(config-if)#exit
Switch(config)#
2-9

delete

This command is used to delete a file.
delete FILE-URL
Parameters
FILE-URL
Default
None.
Command Mode
EXEC Mode.
Usage Guideline
The firmware image or the configuration file that is specified as the boot-up file cannot be deleted.
Example
This example shows how to delete the file named "Image2" from file system on the local flash.
Switch#delete Image2
Delete Image2? (y/n) [n]
File is deleted.
Switch#
2-10

dir

This command is used to display the information for a file or the listing of files in the specified path name.
dir [URL]
Parameters
URL
Default
None.
Specifies the name of the file to be deleted.
y
(Optional) Specifies the name of the file or directory to be displayed.
13