And Lights - Maytag Jetclean MDB4601AWE Use And Care Manual

Maytag jetclean mdb4601awe: user guide
Hide thumbs Also See for Jetclean MDB4601AWE:
Table of Contents

Advertisement

Available languages

Available languages

Cycles, Options and Lights
Cycles
Choose the cycle that best describes your dishload by pressing the cycle select pad. (See page 3, Operating
Tips, for how to begin the cycle).
CYCLE
Pots & Pans or
Scour Wash
(select models)
Heavy Wash
Normal Wash
Rinse Only
Note:
Depending on water temperature, there may be time added to the cycle to bring water up to temperature.
Options
In addition to choosing a cycle, choose as many available options as are needed for your dishload.
OPTION
Delay/Resume
Hi Temp or
Temp Boost
(select models)
Heated Dry
Drain/Off
CAUTION – In models with plastic interiors, it is normal to notice vapor escaping from the door vent in the upper left corner
of the door as the heat dries your dishes. The vapor is hot and may cause minor burns.
DESCRIPTION
Long cycle for heavily soiled dishes, pots and pans.
Medium cycle for average food soils.
Short cycle for light food soils.
Rinses dishes being held until there is a full load.
Delay/Resume can delay or interrupt any wash cycle for 2, 4, or 6 hours. To
set up a delay, first select the appropriate cycle and options for the load.
Then, quickly press and hold the Delay/Resume pad until the desired
amount of delay time is selected. The dishwasher will count down and the
cycle will automatically start as soon as the delay time expires. If you wish
to cancel the delay start, simply press the Delay/Resume pad again. The
indicator light will go out and the cycle will start immediately. This pad can
also be pressed to temporarily interrupt a cycle. The cycle will resume from
the point of interruption when the delay time runs out or when the
Delay/Resume pad is pressed again.
Hi Temp/Temp Boost checks the main wash and final rinse water
temperatures and will extend the heating and water circulation until proper
water temperature is reached. Select Hi Temp/Temp Boost to ensure
proper water temperature for activating detergent and dissolving greasy
food soils.
Heated Dry turns on the heating element during dry for enhanced drying
results. Cancelling Heated Dry turns the heating element off. Towel drying
of some items may be necessary. In models with plastic interiors, it is
normal to notice vapor escaping from the door vents as the heat dries your
dishes. Vapor will escape even if Heated Dry is not selected.
Pressing the pad once will drain the dishwasher and then turn it off.
Pressing the pad twice will turn it off without draining.
DESCRIPTION
CAUTION
6
SEQUENCE
WATER USE
2 Prewashes,
Main Wash, Purge,
10 gallons
2 Rinses
2 Prewashes,
Main Wash, Purge,
8 gallons
Rinse
Wash, Purge
6 gallons
2 Rinses
Rinse, Off
2 gallons
USE WITH CYCLES
All Cycles
All Cycles
(except Rinse Only)
All Cycles
(except Rinse Only)

Advertisement

Chapters

Table of Contents
loading

Table of Contents