Loading - Maytag Jetclean MDB4601AWE Use And Care Manual

Loading

Upper Rack
This rack is designed
to hold glasses,
cups, small plates,
bowls, cookware, etc.
Small plates, bowls
or saucers should be
loaded with soiled
surfaces facing the
center of the rack.
Do not load
glasses over the
tines.
The Twin Shelf (select models) on the right side of the
upper rack folds up or down. Fold it down to hold long-
handled knives, spatulas and spoons or short items like
cups or juice glasses. Fold it up for taller items like
bowls, plates, etc.
Lower Rack
Large items may be
placed in any
convenient location in
this rack. Keep soiled
surfaces facing the
center of the rack. The
back of this rack
accommodates a row
of dinner plates or two
rows of smaller plates.
Serving bowls, pots
and pans also fit across the left side of the rack.
Folding tines (select models) located on the right side,
provide loading flexibility for large-shaped items.
10 Place Settings
10 Place Settings
Utensil Basket
Removable Utensil Basket with Handle
(style may vary)
For best cleaning results, prevent items from nesting
together by placing some items in the basket with
handles up and some with handles down. Load knives,
handles up, through the slots in the covered section
(when closed).
Be sure that thin, finely pointed items do not extend
through the basket. This could block the lower wash
arm.
Small, lightweight items like baby spoons and plastic
measuring spoons should be placed in the covered
section (select models) of the basket for washing.
Removing the Upper Rack
The upper rack can be removed when tall or oversized
items need to be loaded into the lower rack.
Note:
Avoid resting items over the center wash
tower.
To remove:
1. Roll the upper rack 1/3 to 1/2 of the way out.
2. Remove the plastic rack stop from the end of each
track. To remove each plastic rack stop, push inward
(towards the rack) on the ridged area of the rack
stop. The rack stop
will snap open and
can be easily
removed by pulling
straight out. Take
care to support the
track while
removing rack
stops.
3. Roll the rack all the
way out of the track
and remove from the dishwasher.
4. Reverse the above procedure to replace the upper
rack into the dishwasher.
4
Rack
Stop