Download Print this page
Black & Decker Price Pfister Series Instructions Manual

Black & Decker Price Pfister Series Instructions Manual

Decorative lever or french lever handles

Advertisement

Quick Links

807 Series
SHOWER ONLY
Decorative Lever or
French Lever Handles
02-06-08 EO7073A
23653-0400
Copyright
©
2008, Price Pfister, Inc.
A
COMPANY

Advertisement

loading

Summary of Contents for Black & Decker Price Pfister Series

  • Page 1 807 Series SHOWER ONLY Decorative Lever or French Lever Handles 02-06-08 EO7073A 23653-0400 Copyright © 2008, Price Pfister, Inc. COMPANY...
  • Page 2 1A. Valve Location 1B. Spout Location 1C. Shower Head Location 1A. Emplacement du robinet 1B. Emplacement du bec 1C. Emplacement de la tête de douche 1A. Posición de la Válvula 1B. Posición de la el grifo 1C. Posición de la Cabeza de la Ducha 1–800–PFAUCET (1–800–732–8238) For Toll-Free Pfaucet information call...
  • Page 3 FOR VALVE BODY (Hot on Left Side, Cold on Right Side) A) IRON PIPE Place Convertible Tailpieces (4) into Union Nuts (5). Assemble to body (D). Wrench tighten. Apply thread sealant to iron pipe and thread into Convertible Tailpieces (4). B) COPPER SWEAT Connect water supply (Hot on Left side, Cold on Right side).
  • Page 4 Install 1/2 inch iron pipe length per recommended dimensions Remove stem protectors (5A) from threaded bonnets (5B). Place ange (seerough-in layout) to Elbow (4G). Screw Shower Arm (4B) into Elbow washers (5C) and then ange (5D) onto bonnets against the wall. (4G).Tighten until aligned and seal is achieved.
  • Page 5 Before proceeding close COLD Valve (CLOCKWISE) and HOT Valve (COUNTERCLOCKWISE). Attach Handle Hubs (6A) onto Stems (6B) in desired position with Screws (6C). Assemble Decorative Lever Handle (6D). At- tach Buttons (6E). Reverse procedures to remove. Attach Handle Hubs (6F) onto Stems (6G). Attach French Lever Handles: (6H) Left, (6J) Center Diverter, and (6K) Right onto Handle Hubs (6F) with screws (6L).
  • Page 6 STEM ROTATION SET UP Stem Stop (9A) can be inserted into Stem (9C) in either of two ways, depending on the rotation you want to have for your handles. When removing and/or installing Stem Stop (9A), you must look for Missing Tooth (9B) on both Stems (9C) and Stem Stop (9A), and align them.
  • Page 7 Number English Français Español Deco Lever Only Levier Déco Seulement Palanca Déco Solamente 940-900* Acrylic Acrylique Acrílico 940-905* Swirl Acrylic Acrylique tourbillon Acrílico en espiral 940-991* Porcelain, White Porcelaine, blanche Porcelana, blanca 940-992P Porcelain, Green Porcelaine, verte Porcelana, verde 940-993A Porcelain, Black Porcelaine, noire Porcelana, negra...