Page 2
Revision Date Version Description 2016/11/18 Version 1.0 Initial Release 2016/12/27 Version 1.1 Specification correction 2019/07/30 Version 1.2 Add Section 1.3 [Note 5] instruction Projected Capacitive Touch 2021/08/31 Version 1.3 Solution...
Page 3
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc. Copyright 2021 ICOP Technology Inc. Manual No. IUMPDX2090-01 Ver.1.3A Aug, 2021 Trademarks Acknowledgment Vortex86DX2...
Table of Contents Table of Contents ..................... iii .General Information ................1 Product Description ............1 Product Specification ............2 Inspection standard for TFT-LCD Panel ......5 Product Dimension ............10 Panel Mounting Instruction ..........11 Ordering Information ............13 Packing List ...............
1 .General Information 1.1 Product Description PDX2-090T is an ultra-compact platform for the present demanding embedded and productive applications. It has new Vortex86DX2 SoC CPU which consumes only minimum power requirement when running at 933MHz, and DDR2 memory provides faster data transfer rate. By using 9” TFT LCD, PDX2-090T becomes the perfect choice for a limited budget.
1GB or 2GB Flash Memory onboard (Optional) RS-232/422/485 x 1 USB ports (Ver2.0) x 2 RJ-45 Port x 1 Mechanical & Environment Single Voltage +5VDC (PDX2-090T-5A) Power Requirement Multi Voltage +8~+35VDC (PDX2-090T-8A ) Power Consumption 20W (Max.) 0 ~ +50℃ ( 32 ~ +122℉) / Operating -20~+60℃...
Page 7
Operating Humidity 0% ~ 90% relative humidity, non-condensing Dimensions 236.6 x 146 x 35mm (9.31 x 5.75 x 1.38 inches) Weight 790g Front Panel IP 65 Protection Certification CE / FCC / VCCI / Vibration / Shock LCD Specifications Display Type 9”...
Page 8
Type2 Projected Capacitive Touch Screen (Optional) Resolution 25ppi (Min.) Transparency 86% ± 2% Accuracy Within 2.5mm each target ≧ 7H (Pressure:0.5N/45°) Surface Hardness PDX2-090T DM&P Vortex86DX2 Panel PC with 9” WSVGA TFT LCD...
1.3 Inspection standard for TFT-LCD Panel Table 1-2 Inspection Standard DEFECT TYPE LIMIT Note φ<0.15mm Ignore 0.15mm≦φ≦0.5mm N≦4 SPOT Note1 0.5mm<φ 0.03mm<W≦0.1mm, L≦ N≦3 FIBER Note1 VISUAL INTER 1.0mm<W, 1.5mm<L DEFECT φ<0.15mm Ignore POLARIZER 0.15mm≦φ≦0.5mm N≦2 Note1 BUBBLE 0.5mm<φ Mura It’...
Page 10
[Note 1] W : Width[mm], L : Length[mm], N : Number, φ: Average Diameter. White / Black Spot Polarizer Bubble Fig 1-1 Fig 1-2 [Note 2] Bright dot is defined through 6% transmission ND Filter as following. Fig 1-3 PDX2-090T DM&P Vortex86DX2 Panel PC with 9”...
Page 11
[Note 3] C Area: Center of display area O Area: Outer of display area [Note 4] Judge defect dot and adjacent dot as following. Allow below (as A, B, C and D status) adjacent defect dots, including bright and dart adjacent dot. And they will be counted 2 defect dots in total quantity.
Page 12
LCD display if the static image is kept for a period of time without any change. ICOP will suggest customers not to have static image on LCD for over 4 hours without any image movement and also enable screensaver to avoid image sticking issue if LCD displays need to be kept on for a long time.
Page 13
3. After 5 mins, the mura must be disappeared completely. PDX2-090T DM&P Vortex86DX2 Panel PC with 9” WSVGA TFT LCD...
1.5 Panel Mounting Instruction Cut a mounting hole in the panel. (Refer to PDX2‐090T Dimensions on page 7) (Note 1) Check and remove the twelve M3 screws in a diagonal pattern as image below if necessary. Place PDX2‐090T face‐down on a clean, flat surface. Slide the panel cutout around the back of PDX2‐090T, until the panel rests directly on the gasket.
Page 16
Note 1: It is strongly recommended that a professional machine shop cut the mounting hole in the panel. Note 2: The length for all twelve M3 screws will be according to the thickness of mounting panel. For example: The length of standard M3 screws for PDX2‐090T is 6mm.
1.6 Ordering Information Table 1-3 Ordering Information PART NUMBER DESCRIPTION PDX2-090T-5A 9” Panel PC w/1GB DDR2 / 2USB / Line-Out / LAN / COM / CF or MicroSD / RTP / Power Adapter PDX2-090T-8A 9” Panel PC w/1GB DDR2 / 2USB / Line-Out / LAN / COM / CF or MicroSD / RTP /...
Page 18
PDX2-090T-5A-I 9” Panel PC w/1GB DDR2 / Wide Temp. / 2USB / Line-Out / LAN / COM / CF or MicroSD / RTP / Power Adapter PDX2-090T-8A-I 9” Panel PC w/1GB DDR2 / Wide Temp. / 2USB / Line-Out / LAN / COM / CF or MicroSD / RTP /...
2.3 Connector Pin Assignments J8: PS/2 Keyboard J1: CF Master/Slave Switch Pin # Signal Name Pin # Signal Name KBCLK KBDAT Pin # Signal Name Master Slave J3: USB J9: PS/2 Keyboard Pin # Signal Name Pin # Signal Name Pin # Signal Name Pin #...
Page 23
J14: VGA J31: 4-Wires Touch connector Pin # Signal Name Pin # Signal Name Pin # Signal Name R OUT G OUT B OUT HSYNC VSYNCD J32: USB (WLAN Optional) J24: MIC-IN Pin # Signal Name Pin # Signal Name USBD2- Pin # Signal Name...
2.5 External I/O Pin Assignment Power Switch USB Port Pin # Status Pin # Signal Name USB0- Power Connector (5A) USB0+ Pin # Signal Name GGND GGND PS/2 Keyboard Power Connector (8A) Pin # Signal Name Pin # Signal Name KBCLK +8 ~ 35V PMCLK...
Page 26
J10: COM1 RS232/422/485 (Change setting by BIOS) Pin # Signal Name Pin # Signal Name DCD1/422TX-/RS485- RXD1/422TX+/RS485+ TXD1 / 422RX+ DTR1 / 422RX- DSR1 RTS1 CTS1 RJ45 Pin # Signal Name Pin # Signal Name FTXD+ FTXD- FRXIN+ FRXIN- PDX2-090T DM&P Vortex86DX2 Panel PC with 9”...
2.6 System Mapping Table 2-2 Technical Data Sheet System Mapping Memory Mapping Address Description Usage 00000000-0009FFFF System RAM 000A0000-000AFFFF EGA/VGA Video Memory 000B0000-000B7FFF MDA RAM, Hercules Graphics Display RAM 000B8000-000BFFFF CGA Display RAM 000C0000-000C7FFF EGA/VGA BIOS ROM 000C8000-000CFFFF Boot ROM Enable 000CC000-000CFFFF Console Redirection Enable 000D0000-000DFFFF...
Page 28
0061h Port B + NMI Control Port 0062h - 0063h 8051 download 4K Address Counter 0064h Keyboard / Mouse Status / Command Port 0065h WatchDog0 Reload Counter 0070h - 0071h CMOS RAM Port 0072h - 0075h MTBF Control Register 0078h - 007Ch GPIO Port 0,1,2,3,4 Default Setup 0080h - 008Fh DMA Page Register...
Page 29
IRQ Mapping IRQ# Description Usage IRQ0 System Timer IRQ1 Keyboard Controller IRQ2 Cascade for IRQ8 - 15 IRQ3 IRQ4 Serial Port 1 IRQ5 IRQ6 Unassigned IRQ7 IRQ8 Real Time Clock IRQ9 Audio IRQ10 IRQ11 Ethernet 10/100M LAN IRQ12 Mouse IRQ13 Math Coprocessor IRQ14 Hard Disk Controller#1...
2.7 Watchdog Timer There are two watchdog timers in PDX2-090T, we also provide DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://tech.icop.com.tw or download the PDF file: dmp.com.tw/tech PDX2-090T DM&P Vortex86DX2 Panel PC with 9” WSVGA TFT LCD...
3 .Driver Installation The Vortex86DX2 processor is integrated RDC Display chip which is an ultra low powered graphics chipset with total power consumption at around 1-1.5 W. The Vortex86DX2 processor is integrated 10/100Mbps Ethernet controller that supports both 10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area Network for full interaction with local servers, wide area networks such as the Internet.
The PDX2-090T provides the VGA and LAN drivers for Linux, Windows CE, Windows XP Professional, Windows 7, and Windows Embedded standard (WES2009 / WES7). Please get the drivers from ICOP official website: tech.icop.com.tw PDX2-090T also supports most of the popular Linux distributions, for more detail information, please visit DMP official website:dmp.com.tw/tech/ 3.1 PDX2-090T Development Note...
Page 33
Go to the advanced BIOS setting and make the “Onboard IDE Operate Mode” is “Legacy Mode” < Windows XP and Windows 7 installation note > Please visit technical website to get more information: tech.icop.com.tw PDX2-090T DM&P Vortex86DX2 Panel PC with 9” WSVGA TFT LCD...
3.2 BIOS Default setting If the system cannot be booted after BIOS changes are made, Please follow below procedures in order to restore the CMOS as default setting. Press < End > Key, when the power on Press < Del > to enter the AMI BIOS setup Press <...