Maintenance - Black & Decker 20V MAX LST522 Instruction Manual

English
6. Wind the cutting line onto the spool in the direction of
the arrow on the spool. Make sure to wind the line on
neatly and in layers. Do not crisscross.
7. When the wound cutting line reaches the recesses
cut the line.
8. Fit the spool onto the appliance as described in
Replacing Spool Assembly.

MAINTENANCE


WARNING:
of serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start‑up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Cleaning

WARNING:
all air vents with clean, dry air at least once a week.
To minimize the risk of eye injury, always wear ANSI
Z87.1 approved eye protection when performing
this procedure.

WARNING:
harsh chemicals for cleaning the non‑metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get
inside the tool; never immerse any part of the tool into
a liquid.
Accessories

WARNING:
those offered by BLACK+DECKER, have not been tested
with this product, use of such accessories with this
product could be hazardous. To reduce the risk of injury,
only BLACK+DECKER recommended accessories should
be used with this product.
Recommended accessories for use with your product
are available at extra cost from your local dealer or
authorized service center. If you need assistance in locating
any accessory, please contact BLACK+DECKER. Call
1-800-544-6986.
14
29
To reduce the risk
Blow dirt and dust out of
Never use solvents or other
Since accessories, other than
Replacing Guard (Fig. C, D)

WARNING:
,
without guard firmly in place. Damage or personal
injury could result.
Remove Current Guard
1. Remove the guard screw
2. Slide the guard
Assembling the New Guard
1. Slide the guard into place as shown in Fig. C.
2. Replace and securely tighten the guard screw
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.

WARNING:
and RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a BLACK+DECKER
factory service center or a BLACK+DECKER‑authorized
service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is
a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
• Register online at www.BlackandDecker.com/
newOwner.
Two-Year Limited Warranty
For warranty terms, go to https://www.blackanddecker.
com/support/warranty-policy.
To request a written copy of the warranty terms, contact:
Customer Service at Black & Decker, 701 East Joppa Road,
Towson, MD 21286 or call 1-800-544-6986.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
check country-specific warranty information contained in
the packaging, call the local company or see the website for
such information.
Imported by: Black & Decker (U.S.) Inc.
Never operate appliance
shown in Fig. D.
15
10 off.
To assure product SAFETY
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
(1-800-544-6986)
15 .