To Monitor a Call (Workgroup scenario)
1
2
To record your current call
•
To stop the recording a call
•
Table 8.3
DT900/DT900S Series Phone User Guide
M O N I T O R / S U P E R V I S E K E Y
If you have Supervise rights over other users, you can listen (monitor) or join (barge)
calls for users you have Supervise rights over.
The workgroup member's LED on your phone will display stead red to show they are
currently on a call.
Press the key for the workgroup member.
Press the Monitor soft key.
You can then press the Barge or Record soft key to barge on the call or start a
recording of the call. Press Exit to exit this screen without starting a Barge session or
recording of the call.
R E C O R D K E Y
Press the Record key.
A recording of your current call starts.
Press the Record key.
The call recording will stop.
C A L L R E C O R D I N G I N D I C A T I O N
If call recording indication is enabled for your account, the phone indicates call
recording status.
If call recording indication is enabled, a call recording icon
control home screen.
Call recording indications
Record Key
Event
On Demand recording
Steady Red
On Demand recording
Off
- On Hold (local or
remote hold)
Auto Recording
Steady Red
E N H A N C E D P R O G R A M M A B L E K E Y S
Icon (Call
Control
LED
Screen)
None
is shown in the call
Description
Indicates that the call is being
recorded by On Demand Recording.
When the recording is stopped, the
indication is also stopped.
When the call is resumed, call
recording indication is displayed
again.
Indicates that the call is being
recorded by Auto Recording.
8 -123