Linksys PCMLM56 User Manual page 66

Appendix
Solution
Click on Start, Settings, Control Panel. Double-click
on Network. Click on the Configuration tab. Under
The Following Network Components are Installed box,
highlight Client for Microsoft Networks and click on the
Properties button. Once you are in the Client For
Microsoft Networks Properties window, make sure that
Log on to Windows NT Domain is Unchecked. Once you
have made sure that it is Unchecked click on the OK
button.
Problem 5: On the Access Control Tab, Shared Level
Access is grayed out and not accessible.
Solutions
You previously had your primary network logon set to
Client for NetWare Networks. On the Configuration Tab
of the Network Properties window, make sure that your
primary network logon is set to Client for Microsoft
Networks.
Problem 6: In Network Neighborhood you can only see
yourself and no other computers on the network.
Solutions
Make sure that the cables are connected correctly. Make
sure you are getting Link or Activity lights on both the
EtherFast PC Card and your hub. Try changing to a
cable that you know is working.
Your workgroup name may be different from other com-
puters on your network. Make sure each PC on the net-
work is using the same workgroup name.
Problem 7: In Network Neighborhood, you can see all
other computers on the network but not yourself, and all
other computers can see each other and not your com-
puter.
64