Chapter 4: Installing The Adapter; Overview; Instructions For The Setup Wizard; Figure 4-1: Welcome - Linksys PLE200 User Manual

PowerLine AV Ethernet Adapter

Chapter 4: Installing the Adapter

Overview

For each Adapter you use, run the Setup Wizard.

Instructions for the Setup Wizard

1. Go to your computer and insert the Setup Wizard CD-ROM into the CD drive. The Setup Wizard should run
automatically. If it does not, click Start. Click Run, and in the field that appears, enter D:\setup.exe (if "D" is
the letter of your CD drive).
2. On the Welcome screen, click Setup to begin the installation.
Other options include the following:
• Click User Guide to view the online User Guide.
• Click LINKSYS Web to visit the Linksys website, www.linksys.com.
• Click Exit to exit the Setup Wizard.
3. The End User License Agreement screen will appear. If you accept the License Agreement and want to begin
the installation, click Next.
4. The Preparing to Install screen will appear briefly. If you want to cancel the installation, click the
Cancel button.
Chapter 4: Installing the Adapter
Overview

Figure 4-1: Welcome

Figure 4-2: License Agreement

Figure 4-3: Preparing to Install

4