Figure C-10: Change Printer Properties - Linksys EFG120 User Manual

EtherFast Network Attached Storage (120GB with PrintServer)
14. After you click the Finish button, you will see the Printers folder. This folder will show all printers available on
your network, including the printer you have just added.
If you want to change any settings, right-click the printer's icon and select Properties.
You will be asked if you want to install the driver, but since you have already installed it, click the No button.
The Properties window will then open, and you can change the printer's settings.
Congratulations! You have added a printer to your network.
Appendix C: Setting Up the Built-in PrintServer

Figure C-10: Change Printer Properties

47