EtherFast Network Attached Storage (120GB with PrintServer)
12. On the Add Printer Wizard screen, select your printer's manufacturer from the list on the left. Then select your
printer's model from the list on the right. Then click the OK button.
13. Review your printer's settings. If the settings are correct, click the Finish button. If you need to make any
changes, click the Back button. To exit the Wizard without saving any settings, click the Cancel button.
Appendix C: Setting Up the Built-in PrintServer
Figure C-8: Select Your Printer
Figure C-9: Completing the Add Printer Wizard Screen
46