Rear Panel - Linksys EFG40 User Manual

Instant Gigadrive Package Contents: 20 or 40 GBs
The following items should be included in the Instant GigaDrive packaging.
If any of these items are damaged or missing, please contact your Linksys
dealer for replacements.
• One Linksys EtherFast 10/100 Instant GigaDrive
• One AC Power Adapter and Power Cord
• One Driver CD-ROM, containing this User Guide and
GigaDrive Drivers for Windows 95, 98, NT 4.0, 2000, and Millennium
• One User Guide and Registration Card
• Four Gigadrive Stands
System Requirements
• Windows 95, 98, NT 4.0, 2000, or Millennium
• 10BaseT or 100BaseTX Ethernet network
• TCP/IP protocol enabled
D D i i s s c c l l a a i i m m e e r r : Linksys highly recommends that you back up the
files on your Instant GigaDrive on a regular basis. In no
instance will Linksys be responsible for any data loss, nor will
Linksys perform any recovery on lost data or files.
2
Linksys Instant EtherFast Series
®
EtherFast 10/100 Instant GigaDrive
Getting to Know the Instant GigaDrive

Rear Panel

(picture for model EFG20 only)
All of the GigaDrive's connectors and switches are on the rear panel, as seen
below.
Power Switch The Power switch is a spring-loaded soft switch
which powers the GigaDrive on and off. If the
GigaDrive is not powered on, pressing the power
switch will initiate the GigaDrive's start-up
process. Pressing the Power switch while the
GigaDrive is turned on will begin the GigaDrive's
internal shut-down process. The Instant GigaDrive
must be powered off this way, or through its inter-
nal shutdown process.
Power Input
The Power Input port is where the power adapter
plugs in. Never remove or cut off the power sup-
ply while the Instant Gigadrive is turned on.
Printer Port You can also add a printer to your network through
the Instant GigaDrive's Printer port.
3