Tcp/Ip Setup For Windows 2000 - Linksys EFG40 User Manual

Using the Instant GigaDrive's Storage
To use the Instant GigaDrive's storage, you must map a drive letter to each
GigaDrive folder you wish to access. The drive will then be available to all
Windows programs.
1. Double-click the Network Neighborhood icon on the desktop. In
Windows 2000, double-click on My Network Places, then Entire
Network, then Microsoft Network.
2. Locate the Instant GigaDrive, as shown above. If it is not listed, double-
click Entire Network. Then double-click the Workgroup that the
GigaDrive is in. (By default, the GigaDrive is in Workgroup.)
3. Double-click the Instant GigaDrive icon.
4. Right-click a GigaDrive folder (share) to which you have access, and
select Map Network Drive, as shown below.
28
Linksys Instant EtherFast Series
®
EtherFast 10/100 Instant GigaDrive
5. Select a drive letter for this folder, and check the Reconnect at Logon
checkbox. (If you don't choose to reconnect, the mapping will be lost
when you shut down your PC.) Click OK.
6. This drive will now be available in Windows Explorer, and from the
File-Open or File-Save As function in all Windows applications.

TCP/IP Setup for Windows 2000

1. Select the Start button and go to Settings. From here, select Network
and Dial-Up Connections. Click the Local Area Connections # and
select Properties.
2. Be sure to check the following components listed in this window:
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
29