Applications > Instant Messaging; Jabber; Applications > Motion Detection - Linksys PVC2300 User Manual

Chapter 6
Logn Name Enter the login name associated with the
secondary FTP server.
Password Enter the password associated with the login
name for the secondary FTP server.
Fle Path Name Enter the desired file path name on the
secondary FTP server.
Enable Passve Mode Check the box to enable the
Passive mode feature on the secondary FTP server.
Applications > Instant Messaging
Applications > Instant Messaging

Jabber

Enable Jabber
When enabled, an open XML protocol for
message and presence exchange in real time between
two points on the Internet. Jabber asynchronous instant
messaging (IM) platform is similar to IM systems such as
AIM, ICQ and MSN but is open source, extensible through
XML, decentralized (allowing anyone to run a Jabber
server), and any Jabber server can be isolated from the
public Jabber network in order to increase security.
Server Enter the address of your Jabber server.
Logn ID Enter the login name for your Jabber server.
Password Enter the password for your Jabber server
Send To The log will be sent to the e-mail address you
specified here.
Message
Enter the message you wish to attach.
Applications > Motion Detection
NOTE: Motion detection cannot be configured
using the Firefox browser. Internet Explorer
must be used to configure motion detection.
You can set the area(s) of the video image to be examined,
and adjust the sensitivity of detection for each area.
Busness Internet Vdeo Camera wth Audo
Advanced Configuration
NOTE: Motion detection can be triggered by
rapid changes in lighting conditions, as well
as by moving objects. For this reason, it should
only be used indoors.
When you first select the Motion Detection option, you will
be prompted to install an Active-X plug-in. It is necessary
to install this plug-in to use this feature.
Applications > Motion Detection (Install Active-X)
Active-X Message
Applications > Motion Detection
Full Screen Enable this option to detect motion events
within the full view of the screen.
Indcator This area displays the level of motion
•
detected. This option cannot be configured but is
useful for determining a motion threshold.
Senstvty
• Use this to adjust the motion sensitivity.
28