Linksys One Wireless Network; Hardware Installation - Linksys PVC2300 User Manual

Chapter 4

Linksys One Wireless Network

Example Linksys One Wireless Network

Hardware Installation

NOTE:
Before attaching the camera extension or
swivel head, the stand base can be mounted in
a permanent location by using three screws to
secure the stand base to the desired location.
1. The Camera stand can be connected two different
ways:
Attach the stand base to the camera extension and
•
attach the camera extension to the swivel head.
Camera Extension
Stand Base
You can connect the swivel head directly to the stand
•
base if the extension isn't necessary.
Busness Internet Vdeo Camera wth Audo
Locknut
Swivel Head
Swivel Head
Stand Base
2. Connect the camera stand to the bottom of the
camera. Adjust the camera to the appropriate viewing
position.
Locknut
Once the camera is positioned properly, secure the
camera in place by tightening the locknut.
3. Connect the included Ethernet network cable to your
network router or switch.
LINK/ACT PoE LINK/ACT
4. Connect the other end of the cable to the Camera's
Ethernet port.
LEDs
Link
If your network switch provides Power over Ethernet
to the Camera, verify the Camera's LEDs are lit and skip
steps 5-7.
5. Connect the included power adapter to the Camera's
Power port and plug the other end into a standard
electrical outlet.
Installation
PoE LINK/ACT Gigabit LINK/ACT Gigabit
PoE
6