Changing/Deleting A Privacy Mask - Canon VB-H47 Operation Manual

Set the size and position for the preview frame in the video display area.
3
Drag the preview frame shown in the video display area to the position to be masked.
Change the size of the preview frame by dragging  on its four sides.
HM4x S32VE S32D
Important
• Set the privacy mask area to a slightly larger size than the area to be masked.
Set [Mask area] to [Enable].
4
The settings for the privacy mask area is enabled.
Set [Mask area] to [Disable] to temporarily disable privacy mask areas without deleting. The privacy mask areas
in the privacy mask registration area will be displayed as frames with a diagonal line.
Change the color of the privacy mask area with [Color] as necessary.
5
The color selected here is reflected to all the preview frames and privacy mask areas.
To add privacy mask areas, repeat steps 1 to 5.
6
Up to eight privacy masks can be saved.
Click [Apply].
7
The privacy mask area is saved to the camera.
Saved privacy mask areas are shown in the video display area and the privacy mask registration area.
Important
• It will be necessary to reset the position of the privacy masks if the settings in [System] > [System] > [Installation Conditions] >
[Video Flip] are changed.
• For resetting the privacy masks after changing [Video] > [Picture (Option)] > [Camera Control] > [Image Stabilizer], reset all the
privacy mask positions and sizes.
HM4x S32VE S32D
• If the privacy mask settings are changed after saving a panorama image in [Panorama], recreate the panorama image in
[Panorama] (P. 89).
• After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas to be masked do not become visible when
the camera angle is altered.
• Privacy masks may deviate slightly from the specified position depending on the zoom position.

Changing/Deleting a Privacy Mask


Privacy Mask Registration Area
This shows the positions of privacy mask areas in the entire area that can be captured by the camera.
Privacy mask area is displayed with it's frame filled in. When [Mask area] is set to [Disable] (P. 83),
to the area number.
HM4x S32VE S32D
Note
• The current camera position shown in the video display area is indicated by a preview frame (blue frame).
HM4x
83
appears next