Ridgid Contact Information; Description - RIDGID 760 FXP Power Drive Manual

RIDGID Contact Information

If you have any question concerning this RIDGID
uct:
– Contact your local RIDGID distributor.
– Visit RIDGID.com to find your local RIDGID contact
point.
– Contact Ridge Tool Technical Service De part ment
at rtctechservices@emer son.com, or in the U.S. and
Canada call (800) 519-3456.

Description

The RIDGID Model 760 FXP Power Drive is a battery
®
powered tool which provides power for threading pipe and
conduit. Forward and Reverse rotation can be selected
with a Forward/Reverse Slide Switch while ON/OFF is
controlled by a momentary contact switch.
The power drive uses RIDGID 11-R (Model 760 FXP
11-R) and 12-R (Model 760 FXP 12-R) die heads (de-
pending on tool configuration) for 1/8" – 2" pipe. For the
Model 760 FXP 11-R version, an adapter is required for
1/8" – 1¼" sizes. This adapter and the 1½" – 2" sizes for
11-R, as well as all 12-R die heads in the Model 760 FXP
12-R, are held in the Power Drive using a Quick-acting
Retaining Mechanism. Other die heads such as OO-R
may be used with adapters. Due to the threading speed
exceeding 40 rpm, RIDGID High Speed dies and Nu-
Clear™, Endura-Clear™ or Extreme Performance™
Thread Cutting Oil are recommended for use with the
760 FXP Power Drive.
The Tool Status Lights indicate information related to wire-
less connection status, nearing the end of proper thread
creation, battery status, and tool error status. The work
lights surrounding the die head area turn on when the
ON/OFF switch is depressed to illuminate the work area.
The power drive includes wireless technology to allow
connection to smart phones and tablets. See "RIDGID
Link App connection (Wireless Communication)" section
for details.
The 760 FXP 12-R power drive can also be used to power
the RIDGID 258/258XL Pipe Cutters and for other appli-
cations, (See "Other Uses").
999-995-242.10_REV A
prod-
®
Warning
Label
Push Pad
LED Work
Light
Drive
Ring
Figure 1 – 760 FXP Power Drive
Figure 2 – 692 Support Arm
The 760 FXP Power Drive serial number plate is located
on the battery rail under the handle. The last 4 digits of
the serial number indicate the month and year of the
manufacture (MMYY).
Figure 3 – Machine Serial Number
760 FXP Power Drive
Forward/Reverse
Slide Switch
Handle
Tool Status
Lights
Gear
Housing
Reset
Housing
Pawl
Drive
Pawls
Jaws
XXXXXXXXXMMYY
ON/OFF
Switch
Handle
Battery
Latch
Battery
Serial
Plate
Motor
Handle
5 5