GE AHTT08 Owner's Manual & Installation Instructions page 14

Installation Instructions
6. INSTALLING SIDE FILLER
PANELS (cont)
Attaching Side Panels (cont)
• Measure the gaps from the side of the unit to the ends
of the window and cut Foam Side Panels to size.
• Slide the Foam Side Panels into place within the Side
Panel Brackets and ensure the gap to the end of the
window is completely sealed.
• Foam Side Panels must be flush with the top of the
unit. If panel sticks above chase-way, mark and cut
accordingly.
14
Side Panels
7. INSTALL WEATHER STRIPPING
FOAM ADHESIVE
• Cut the Adhesive Weather Stripping Foam to the
width of the window. Peel off the backing and lay
the foam across the width of the window, over the
unit and side panels (following the line drawn with
the pencil). After laying the foam down, close the
window on top of it.
Adhesive Weather
Stripping Foam
49-5000634 Rev. 3