Table of Contents
Advertisement
Installing a HHHL GPU
The door has a retaining block that prevents the HHHL GPU from backing out of its PCIe socket. The retaining block
has a pin that seats into a hole on the bottom of the riser.
c) Turn the riser over and verify that the retaining pin is securely seated in the hole.
d) Using a #2 Phillips screwdriver, tighten the hinge retention screw (3 in the following illustration).
e) Using a #2 Phillips screwdriver, tighten the vertical securing screw on the wall of the riser (4).
What to do next
See
Installing Riser, Type B, on page
Cisco UCS X440p PCIe Node Installation and Service Guide
38
25.
Servicing the Cisco UCS X440p PCIe Node
Advertisement
Table of Contents
