Casio XJ-M145 Network Manual page 3

The following shows input switching instruction and input switching query parameters and
•
their corresponding input sources.
Parameter Input
Source
11 Computer
12 Computer
13 Computer
14 Computer2
15 Computer2
16 Computer2
21 Video
22 S-video
31 HDMI
41 USB
Image only mute is not supported by the AV mute instruction and AV mute state query.
•
The cover open error and filter error are not supported by the error state query.
•
A projector name query returns the projector name specified on the System Admin Page. For
•
details about the System Admin page, see "System Admin Page Operations and Settings" in
the "Wireless Function Guide" on the CD-ROM that comes with the projector.
A manufacturer name query returns CASIO
•
A device name query returns XJ
•
The password used for the connection authentication process is the same as the System
•
Admin page password. The Projector can be configured to enable or disable authentication. To
do so, use [Wired LAN Settings]-[PJLink authentication] on the Projector's Setup Menu.
E E E E n n n n able able : PJLink connection authentication enabled. (Default) able able
Disable e e e : PJLink connection authentication disabled. Disabl
Disabl Disabl
Up to firmware version *.0.3.1, when the digest generated by the password is appended to the
•
command and sent to the projector during the authentication process, all of the letters
included in the digest must be upper-case.
Example:
From firmware version *.0.3.2 onwards, the digest is accepted even if it contains lower-case
letters.
For information about the functions of other commands, see the PJLink specifications issued by
COMPUTER
Terminal Setting
Auto
RGB
Component
Auto
RGB
Component
CASIO.
CASIO CASIO
XJ- - - - NP NP.
XJ XJ NP NP
a6bb86c8a36e251485e539e7abb71b50%1POWR
↓
A6BB86C8A36E251485E539E7ABB71B50%1POWR
Remarks
On the XJ-H1650, XJ-H1750, XJ-H2650,
XJ-ST145, and XJ-ST155 the input source is
Computer 1.
XJ-H1650, XJ-H1750, XJ-H2650, XJ-ST145,
XJ-ST155 only
''
''
''
''
2