Table of Contents
Advertisement
You can define up to 3 time slots with a start
and end time for the day, during which the
motion detection will be active.
You can also check below if you want to apply
the same ranges to all or part of the other days
of the week. Click on "Save" to finish.
6.4.
Configuration
with
voice
assistants
Your WelcomEye View camera is compatible
with Alexa and Google Assistant voice
assistants.
For example, you can display your camera's
image if your voice assistant has a screen, or
control the turning on and off of lights if you
have connected a light to your camera.
Alexa: Go to the Alexa application and install
the "Philips WelcomeEye" skill. Then enter the
email address of your WelcomeEye account and
its password.
Google Assistant: Go to the GoogleHome
application and add the "Philips WelcomeEye"
application in the "Set up a device"/"Works with
Google" section. Then enter the email address
of your WelcomeEye account and its password.
Then, if necessary, run a new device detection
on your voice assistant.
Two new devices will be detected corresponding
to both the camera and the light control (if a light
fixture has been connected to the back of the
camera). Assign them a suitable name.
13
WelcomeEye View / V1
Advertisement
Table of Contents
