Honeywell HEN04112 User Manual page 36

36 | Performance Series Full Poe Embedded NVR Remote User Guide
www.honeywell.com/security
Figure 3-2 Encoding Interface
Note If the NVR fails to retrieve the configuration information for your selected
camera/channel, then you should navigate to a different window (such as
Snapshot or Overlay), then navigate back to the Encode window.
Table 3-2 Encoding Configurations
Setting
Channel
Code Stream Type
Video Enable
Compression
Description
Select a channel from the dropdown list
Select from Main Stream, Motion Stream, and Alarm
Stream. You can select different encoding frame rates for
different recorded events.
The NVR system supports active control frame function (ACF),
which allows you to record in different frame rates.
For example, you can use a high frame rate to record
important events, and configure a lower frame rate for
recording scheduled events. ACF allows you to set different
frame rates for motion detection recording and alarm
recording.
Click to enable the extra video stream. Enabled by default.
The main bit stream supports H.264. The extra stream
supports H.264 and MJPG.