Cleaning & Maintenance - Black & Decker BAPUV150 Instruction Manual

SET UP & USE
CLEANING AND MAINTENANCE
WARNING: Be sure to unplug from the electrical supply source before cleaning
appliance or changing the filter.
Do not use liquids to clean the air purifier.
Do not attempt to disassemble the air purifier for cleaning.
• Wipe the exterior of the air purifier with a soft, dry cloth. Make sure the particle
sensor does not become clogged with dust.
• If necessary, wipe only the exterior housing with a damp cloth, then immediately
dry it.
Cleaning the Air Quality Sensor
1. Use a soft brush to clean the inlet/outlet of the air quality sensor.
2. Remove the protective cover of the air quality sensor.
3. Clean the air quality sensor lightly with wet cotton swabs,
then dry with dry cotton swabs.
4. In order to get maximum performance, clean the air quality sensor every two
months.
Pre-filter: Clean every two months. To clean, remove from unit. Use a soft brush and
soap and water to remove particles. Insert back into unit when completely dry.
Filter should click into place. Pre-filter has a lifespan of 20yrs.
HEPA Filter and Active Carbon Filter: Change filters at the same time, after 1600
hours of use or once a year.
Photo-catalyst filter: Change every three years. Use a dry cloth or vacuum cleaner to
remove the dust particles.
UV Bulb: UV Bulb should be changed after 1.5 years or 15,000 hours of use.
Page 12