Black & Decker BAPUV150 Instruction Manual page 9

SET UP & USE
In AUTO mode, the fan speed is automatically set according to the air quality in the
room.
FAN Speed. There are four fan speeds under the SPEED setting, LOW, MEDIUM, HIGH
and MAX settings. To change the speed from AUTO mode, touch the speed button
continuously to scroll through LOW
fan speed MAX can be chosen when all three icons are lit up.
To shut off the unit at any time, touch and hold the POWER button until all indicator
lights go OFF. The red power button will be illuminated. Unplug the air purifier.
Control Panel
FUNCTION :There are two options on this setting. 1: Press
ultraviolet light sensor
button if you would like to activate the Anion function
negative ions which attaches to dust and allergens and removes them from the air. UV
and Anion functions can be activated and in-use at the same time.
MODE :Press the MODE button to illuminate the AUTO or SILENT option.
A
In AUTO mode
the room. In SILENT mode
RESET :After installing replacement filters, reset the machine by holding down
button for 5 seconds. This button can also be pressed to turn the air quality indicator
on and off.
Sleep Mode
Sleep mode is activated automatically when there is insufficient light. The icons will
be dimmed and will run on the lowest fan speed to ensure a comfortable sleeping
environment.
Timer Function
Touch the TIMER
number of hours for the air purifier to shut off. The corresponding number light goes
on. To stop the air purifier before the set time has elapsed, touch the POWER button
until the standby light goes on. None of the numbers will be illuminated.
Air Quality Indicator
Air quality indicator will adjust based on the air quality in the environment.
Blue 0-50
Green 50-100
Purple 100-150
Red 150-
which kills a variety of bacteria and viruses. 2: Press
, the fan speed is automatically set according to the air quality in
, the fan will operate on the lowest fan setting.
to scroll through the number of hours (1H, 4H or 8H) to select the
Excellent
Good
Normal
Poor
MEDIUM and HIGH settings. The fourth
button to activate
. Anion function creates
Page 9