Tool Status Lights - RIDGID RP 380 Operator's Manual

Control
ON/OFF Button
Run Switch
Pressure Release Button
Attachment Mounting
Pin
Sleeve - Long Series
Configuration
Sleeve - Standard Series
Configuration
Figure 4 – Controls Chart

Tool Status Lights

8
Marking Description
Main tool power switch. Press to turn ON / OFF.
ON: Press button until light turns on. See Figure 5 – Tool Status Lights
OFF: Press button until light turns off. Tool will automatically turn OFF
if left unused for ten (10) minutes
Depress to press fittings, release when tool locks on. Releasing the
- switch will not stop the tool once it has locked on. This assures
consistent, repeatable press joint integrity.
Allows tool to be released without completing press. If used, press
connection is not complete and must be repeated.
Holds attachment to tool. See figure 6.
-
Sleeve rotates 90° between "Long" and "Standard" configurations for
use with appropriate attachments (see Changing Tool Configuration
(Long / Standard)
Color Light
Machine ON, ready to use.
Green
Battery low. Tool will not operate. Recharge
battery/Insert fully charged battery.
Tool
Red
temperature range. Bring the tool and battery to
correct operating temperature range.
Ridge Tool Company
Description
and/or battery out of
RP 380 Press Tool
Icon
Specification