Specifications - Makita BO3710 Instruction Manual

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Speed adjusting dial
4-1. Punch plate
4-2. Abrasive paper without pre-
punched holes

SPECIFICATIONS

Abrasive paper size
Orbits per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
5-1. Screwdriver
5-2. Screw
6-1. Abrasive paper
6-2. Pad
7-1. O-ring
8-1. Dust spout
Model
Pad size
-1
)
Overall length
Net weight
Safety class
noise level determined
) : 72 dB (A)
pA
value (tri-axial vector
2
) : 3.5 m/s
h
2
BO3710
11,000
ENE052-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
ENF002-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG104-1
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Finishing Sander
Model No./ Type: BO3710,BO3711
Conforms to the following European Directives:
2006/42/EC
ENG211-2
They are manufactured in accordance with the following
standard or standardized documents:
sum)
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG901-1
3
8-2. Dust bag
9-1. Holding tab
10-1. Dust box
10-2. Dust nozzle
11-1. Latch
11-2. Dust nozzle
BO3711
93 mm x 185 mm
93 mm x 228 mm
4,000 - 11,000
253 mm
1.6 kg
/II
ENH101-17