Program End; Water Shutoff Warning; Flood Warning; Innerclean - Beko BDIN Series Instructions Manual

Hide thumbs Also See for BDIN Series:
Table of Contents

Advertisement

2 doses of rinse aid are filled in P:2
position.
3 doses of rinse aid are filled in P:3
position.
4 doses of rinse aid are filled in P:4
position.

Program end

When the duration of your chosen
program comes to an end, an acoustic
signal will warn you to switch off the
machine. This sound signal warns at
certain intervals before going off.
The End of Program indicator lights up when
the washing program is completed. 1. Open
the door of the machine.
2. Press the On/Off button to
turn off the machine.
3. Close the tap.
4. Remove the plug from the socket.
To save energy, the product will
turn off automatically after the
program has finished or if the
program has not started.
Leave the clean dishes in the machine
for about 15 minutes to cool. The
clean dishes will dry faster if you leave
the machine door slightly open during
this phase. This process increases the
drying effectiveness of the machine.
Water shut-off warning
If the water supply is turned off or the tap
is turned off, the machine will not be able
to take any water and the E:02 symbol will
flash on the program indicator. The wash
program will be interrupted as long as the
problem persists, with the water supply
regularly checked by the machine; when
the water supply is restored, after a short
while the E:02 symbol disappears and the
washing program resumes.
Warning for
flood
If the machine takes in too much water
or if there is a leak in any part, the
machine will detect it and the E:01
symbol on the program indicator will
flash. As long as the flooding
continues, the protection algorithm will
be active and try to drain the water.
When the flood is stopped and safety is
ensured, the E:01 symbol will
disappear. If E:01 does not disappear,
there is a permanent fault. In this case,
an authorized service center must be
contacted.

InnerClean

(depending on model)
We recommend that you run this
program every 1-2 months to clean
and keep the machine hygienic. Run
the program with an empty
dishwasher. For an efficient result, we
recommend that you use a special
detergent to clean the machine.
Use it
Machine cleaning program not for
washing dishes. The program uses
very hot water which is harmful to
dishes.
39/NL

Advertisement

Table of Contents
loading

Table of Contents