Technical Specifications - Beko BDIN Series Instructions Manual

Note for the test organisms: Data
required for performance testing will
be provided upon request.
Applications can be mailed to the
following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock
and serial numbers of the product to be
tested in your email along with your
contact details. The product code, stock
and serial numbers can be found on the
type plate on the side wall of the door.
Compliance with standards and
test data / EC declaration of
conformity
Development, production and
sales phases of this product
comply with the safety rules
contained in all relevant regulations of the
European Community.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC
60436/EN 60436
You can view the model information
contained in the product database by
going to the following website and
searching for your model identifier (*)
which can be found on the energy
label.
https://eprel.ec.europa.eu/
XXXXXXXXXX (*)

Technical specifications

Maximum washing capacity ('check
the energy label and the table
program data and average consumption
values in the quick start guide.)
Height (refer to
installation document for installation)
Width: 60
Depth: 57
Power supply: 220-240 V,50Hz *
Total power 1800-2100 W *
Heating power: 1800 W *
Total current: 10 A *
Pump power: 90 - 125 W *
Drain pump power: 30 W *
* Check the nameplate on the
machine door for details
regarding the current values.
Water pressure 0.3 to 10 bar
(= 3 – 100 N/cm² = 0.03-1.0 Mpa)
The technical specifications are
subject to change without notice
to improve product quality.
The illustrations in this manual are
schematic and may not exactly
correspond to the product.
Values indicated on the product
notes or in other printed
documents supplied with the
product are obtained under
laboratory conditions according to
relevant standards. These values
may vary depending on product
usage and environmental
conditions.