Specifications; Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita GA031G Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length with BL4025
with BL4040
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
GA027G GA028G
100 mm (4") 115 mm
(4-1/2")
6.4 mm 7.2 mm
M10 M14 or 5/8"
(country specific)
2.9 - 3.4 kg 3.0 - 3.6 kg
Intended use
The tool is intended for grinding, sanding, wire brushing
and cutting of metal and stone materials without the use
of water.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
9 ENGLISH
GA029G GA030G
125 mm (5") 100mm (4")
6.4 mm
M10
-1
8,500 min
413 mm
425 mm
3.0 - 4.5 kg 2.8 - 3.4 kg
D.C. 36 V - 40 V max
BL4025 / BL4040
DC40RA
Read all safety warnings, instruc-
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
GA031G GA032G
115 mm 125 mm (5")
(4-1/2")
7.2 mm
M14 or 5/8"
(country specific)
2.9 - 3.6 kg 3.0 - 4.4 kg