Enable Or Disable Smart Connect - NETGEAR Nighthawk AXE7300 RAXE290 User Manual

Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Scroll down to the Wireless Advanced Settings section for the radio for which you
want to set up a WiFi schedule.
You can set up a WiFi schedule for one, two, or all radios.
6. Click the Add a new period button.
The page adjusts.
7. Use the menus, radio buttons, and check boxes to set up a period during which you
want to turn off the WiFi signal.
8. Click the Apply button.
The Wireless Settings page displays.
9. Select the Turn off wireless signal by schedule check box to activate the schedule.
10. Click the Apply button.
Your settings are saved.

Enable or disable Smart Connect

Smart Connect selects the fastest WiFi band for your device. For Smart Connect to work,
the 2.4 GHz and 5 GHz bands must use the same WiFi network name (SSID) and network
key (password). That means that when you connect to the router with WiFi, you see only
one SSID that connects to both bands.
Note: If you enable Smart Connect and the SSID and passwords for the 2.4 GHz and
5 GHz bands do not match, the WiFi settings for 2.4 GHz band overwrites the WiFi
settings for 5 GHz band.
To enable or disable Smart Connect:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
Manage WiFi Settings 82 User Manual