Table of Contents
Advertisement
You will need a suitable location near
a free power socket for mounting the
appliance on the wall.
Wall mounting
The supplied wall bracket has a
mounting plate with a bag of screws
attached to the back.
Attach the mounting plate to the point
on the wall where you want the wall
mounting to be.
Remove the bag of screws.
Press the release catch at the bottom
of the wall bracket.
Remove the mounting plate from the
wall bracket by sliding it downwards.
Attaching the mounting plate
2 plugs and 2 T20 TORX screws are
supplied for attaching the mounting
plate to the wall.
You will also need a battery-operated
screwdriver or a drill (with a drilling
diameter of 6 mm).
Depending on how you decide to
configure your vacuum cleaner, select a
distance of 45 cm or 98 cm between
the bottom edge of the mounting plate
and the floor.
Be careful not to damage any cables
laid in the wall.
21
Advertisement
Chapters
Table of Contents
