Connecting The Comfort Handle - Miele SO 2822 Series Operating Instructions Manual

Connecting the Comfort handle

Depending on how you decide to
configure your vacuum cleaner, you can
connect the Comfort handle to either
the suction tube or the PowerUnit.
 Push the Comfort handle down onto
the suction tube connector from
above until it audibly clicks into place
(left image detail).
 Slide the Comfort handle along the
guide line on the dust container
handle and down onto the PowerUnit
connector from above until it audibly
clicks into place (right image detail).
 Switch off the vacuum cleaner using
the On/Off switch on the front of the
Comfort handle if you want to
separate the sections.
 Press the release catch and remove
the Comfort handle by pulling it
upwards.
17