Connecting The Powerunit And The Suction Tube; Inserting The Battery - Miele SO 2822 Series Operating Instructions Manual

Connecting the PowerUnit and the
suction tube
Depending on how you decide to
configure your vacuum cleaner, the
suction tube is located either above or
below the PowerUnit.
 Slide the suction tube along the guide
line on the dust container handle and
down onto the PowerUnit connector
from above until it audibly clicks into
place (left image detail).
 Push the PowerUnit connector into
the suction tube from above until it
audibly clicks into place (right image
detail).
18
 Press the release catch to separate
the individual sections from each
other.

Inserting the battery

 Push the battery along the guide lines
until it audibly clicks into place in the
PowerUnit.